Home>
Supports>Technical Supports
Technical Supports
- DC OK Signal Instruction of Smart Alarm Din Rail Power Series
- Lead Acid Battery Charging Curve
- Installation Guides
- Why choose optional Reign Power AC-DC power modules ?
- Why chose Output Monitoring Digital Display Rail Power ?
- Why using Reign Power Intelligent Power Supply ?
- Why the label of AC input rage show 100~240VAC, but the specification show as 90~264VAC ?
- Why power supply shut down when using on the servomotor application ?
- Why the input voltage marked on the spec. sheet is 88~264 VAC while that it is 100~240VAC ?
- The output ground (GND) and frame ground (FG) is the same point in my system, can REIGN POWER's powe...
- Will REIGN POWER's products with CE marking meet the EMC requirements without fail after assembling ...
- Why the output voltage of +12V channel in RP40501SV is lower than the range defined in the spec. she...
- When testing the RP20351SV , the +5V channel is correct, but the +12V channel is over the specificat...
- During the operation of REIGN POWER's power supply, there is some leakage current on the case. Is th...
- Can we use the REIGN POWER's power as a battery charger ?
- If we need a 600W output, can we use two RP1320-XXC connecting in parallel ?
- If we need a 96V output power supply, but REIGN POWER does not have this model, can we use two 48V p...
- Can REIGN POWER's power supply be used in the range of 45Hz ~ 440Hz? If YES, is there anything speci...
- Why my power supply shuts down during operation and after turning it off, I can restart the power su...
- Why the fan is not running when turning on certain models ?